Nails Art Tool High Temperature Sterilizer Box Balls Manicure Glass Disinfection
Package contents: 1*Professional Sterilizing Pot Tools,1 Pack of Glass balls
1. Place the sterilizer on a flat surface.
2. Open the lid and place the quartz sand into the inner tank; the amount of quartz sand should not be too much (not more than 80% of the inner tank volume).
3. Turn on the power; turn on the power switch, the heating indicator lights, and the disinfection starts heating. The red light is the power light, and the green light is the heating light. When the heating temperature reaches the preset temperature, the green light is extinguished and the heating is stopped; when the temperature drops to about fifteen degrees, the automatic reset is continued to continue heating, and the cycle is continuously operated. Unplug the power when you don’t need it.
4. After heating for 10 to 12 minutes, insert the tools to be disinfected (eg scissors, razor, etc.) vertically into the quartz sand.
5. The tool is heated for about 20 to 30 seconds. Wear gloves to remove the tool.
6. When the temperature of the sterilizer liner reaches 185 °C, the heating indicator will automatically turn off, the sterilizer stops heating; when the liner temperature decreases, the heating indicator will automatically light up and the sterilizer will automatically heat up.
7, disinfection beads can be reused, it is recommended to change for 3 to 4 months or when changing dirty
8, this is a high temperature disinfection tool, do not sterilizer directly by hand, so as not to hurt your hand
Small hand sanitizer here